Le Mark Self Adhesive Tapes - Double Sided tapes for all applications

NEC Approved Double Sided

NEC Approved Double Sided Tape was designed & manufactured specifically for use at events & exhibitions as an economical and easy way of fixing carpets and general floor coverings to exhibition floors.

With its design comes a two-strength adhesive. On the open side, a medium-tak adhesive allows good 'grab' on a variety of clean dry surfaces and, most importantly, maintains excellent 'clean peel' properties. Although NEC Approved Double Sided Tape leaves minimal residue on the applied surface when removed, always test on a small area first.

Roll Sizes: 50mm x 50m	Temperature Range: -10°C to 60°C	Shear Strength: 18N/cm
	Residue Resistance: Good	Adhesive Strength: 6N/cm
The above information is based on our best current knowledge and is intended as a general guide. It is not a warranty or specification and customers must determine that the product is suitable for their particular purpose before use.

Double Sided Polypropylene

Double Sided Polypropylene Tape is a general purpose, clear, double sided fixing tape.
Our Polypropylene tape is designed to be used as a general purpose double sided tape. This product offers a medium level adhesive and durability, and is ideal for short term, medium demand applications.

Roll Sizes: 50mm x 33m	Temperature Range: -10°C to 60°C	Shear Strength: 30N/cm
	Residue Resistance: Moderate	Adhesive Strength: 7.5N/cm
The above information is based on our best current knowledge and is intended as a general guide. It is not a warranty or specification and customers must determine that the product is suitable for their particular purpose before use.

Double Sided Foam

This is a white, cross linked, closed cell, polyethylene foam coated on both sides with a rubber based adhesive. It offers high peel and shear properties and is produced in self-wound form on a kraft release liner.

Le Mark Double Sided Foam offers great resistance to water, detergents and alcohols and is one of the strongest adhesive foams available.

Roll Sizes: 12mm x 50m 25mm x 50m 50mm x 50m Custom sizes available	Adhesive Data: Peel 180°, 30 min (N/25mm) on stainless steel - >17* Shear on stainless steel 1kg - 25mm x 25mm (hours): >1000 Shear (N) @23°C - >100: @70°C - >2
Foam Thickness: 1.1mm +/- 0.15	Heat Resistance: -40°C to +60°C
Chemical Resistance: Resistant to water, detergents, alcohols. Not recommended for use in contact with aliphatic or aromatic hydrocarbons

The above information is based on our best current knowledge and is intended as a general guide. It is not a warranty or specification and customers must determine that the product is suitable for their particular purpose before use.

Gel-tak Filter Fix Tape

Gel-tak Filter Fix Tape has been designed to attach any polyester colour filter to glass or a smooth, clean surface.
It holds fast at a constant service temperature of 80°C (175°F) and, if required, can resist temperatures reaching 200°C (395°F) for a short time.

Gel Tak has a special adhesive which allows the filter to be removed and re-positioned as many times as required, peeling cleanly away from the glass surface every time and leaving no residue or mess.

Roll Sizes: 12mm x 66m Custom sizes available	Temperature Range: 80°C Constant, 200°C Short Term
Adhesive Strength: 7N/25mm	Residue Resistance: Excellent
The above information is based on our best current knowledge and is intended as a general guide. It is not a warranty or specification and customers must determine that the product is suitable for their particular purpose before use.

Double Sided High-tak Cloth

Double Sided High-tak Cloth is a double-sided, open weave, cloth tape with hot-melt adhesive on both sides.

This tape is ideal for permanent fixing of carpets, heavy duty joining, fixing and fastening.

Roll Sizes: 25mm x 50m, 50mm x 50m	Temperature Range: -10°C to 60°C
Shear Strength: 25N/cm	Adhesive Strength: 16N/cm
Residue Resistance: Moderate
The above information is based on our best current knowledge and is intended as a general guide. It is not a warranty or specification and customers must determine that the product is suitable for their particular purpose before use.